1:10 On-Road Nitro Car 'PACE-SETTER'(Single Speed)

1. Large capacity 75cc leak proof fuel tank with overflow pipe.
2. Spring loaded fill cover for quick re-fueling.
3. Front/rear leak proof differential with metal bevel gears.
4. Lightweight aluminum flywheel 13.8g for quick engine response.
5. Adjustable oil filled shock absorbers.
6. Differentials with 5 screws which provide quick maintenance.
7. Powerful disk brake system with user replaceable pads.
8. Rigid 2.5mm anodized aluminum chassis.
9. High flow dual foam element air filter (*user serviceable)
10. 56mm high power silencer and 7.5mm regulated fuel tank vent.



Vehicle length:360mm
Vehicle width:200mm
Height:112mm
Wheelbase:260mm
Track:195mm
Gear Radio:7.67:1
Weight:aprox.1665g
Ground Clearance:4.5mm
Wheel Diameter:65mm
Wheel Width:26mm
Engine level:15/16cxp


(1) 1 x BRAND NEW ENGINE
(2) 1 x 1:10 SCALE PAINTED LEXAN BODY CHASSIS
(3) QUALITY SANWA OEM "SPEED" SPORT WHEEL RADIO CONTROL SYSTEM
(4) FULL ENGLISH MANUAL & WARRANTY
For more information, please visit this products at http://www.rcaction.com.au

HSP Atomic Warhead 1:10 Nitro 2-speed 4WD Buggy (RTR)

• 2 speed transmission
  
• Low friction Shaft drive transmission system.
  
• Gear Differentials.
  
• Metal Cap Oil damper shock installed.
  
• Multiple shock installing positions for fine tune.
  
• Low Center of Gravity located Steering Servo
  
• Camber, toe angle are fully adjustable
  
• Fuel tank with vast capacity, easily to refuel with super calibre, prevent overflowing and leaking
  
• Front/rear umbrella gear differential and differential box with leak protection
  
• With 13.8g super-light-weight fly wheel, make the engine smaller in load
  
• Differential box fixed with 5pcs of screw only, fixing/disassembling is easy
  
• The all-metal disc type brakes and super thick asbestos brake block
  
• Hi-grade 6061 aluminum chassis, thickness:2.5mm
  
• Double sponge filter, dust proof result is better. 7.5mm oversize gas vent

camber link, toe angles,shock position are fully adjust bale	Rear Down force is adjustable by wing angle adjustment.
Aluminum shock stay with oil shocks	border="1" align="baseline"> Steering servo are lay down to make the C.G. of car much lower.

Length Width Height Track Wheelbase Weight Clearance Gear ratio Wheel Size Engine

400mm 250mm 160mm 185mm 275mm approx. 1800g 26mm 5.84 (H), 8.58 (L) F 86×32mm (F)/ F 86×40mm (R) .16 SH High Quality Engine

(1) 1 x BRAND NEW ENGINE

(2) 1 x 1:10 SCALE PAINTED LEXAN BODY CHASSIS

(3) QUALITY SANWA OEM "SPEED" SPORT WHEEL RADIO CONTROL SYSTEM

(4) FULL ENGLISH MANUAL & WARRANTY

HSP Gladiator 1:10 Nitro 2-speed 4WD Truggy (RTR)

You are buying a New Nitro 1:10 Gladiator Truggy by HSP. Latest release by this popular brand

Factory finished complete RTR (Ready to Race) package with radio gear included and preinstalled, requires only glow ignitor and AA batteries to get going.

Easy to run and maintain with low cost parts available directly from us.

Being a cross between a buggy and a truck, this new model is designed for off-road rally style racing and jumps.

High power Taiwan Vertex VX 18 engine, up to 90kph top speed. New version with 5Kg steering servo for better durability.

Double sponge filter and dirt proof battery case, ensuring reliable performance even in dirt.

Colour as shown

15% nitro mix recommended, available from our store.

CHASSIS

• 6061 2.5mm aluminium alloy chassis
  
• Composite upper deck, front and rear braces
  
• Chassis size - 400 x 300mm, 275mm wheelbase
  
• 35mm ground clearance
  
• 105mm wheels
  
• All metal brake disc
  
• 75cc pressure fuel tank with pressure relieve design
  and long overflow pipe
  
• 4 wheel drive system with centre shaft and umbrella
  differential
  
• 2 speed gearbox - 5.84:1 and 8.58:1 ratio
  
• Gear reduction assembly
  
  

SUSPENSION:

• 5-position adjustment on tower + 2 on each suspension
  arm
  
• Camber, toe in / out adjustment on front and rear end
  
  
• 3mm shock towers, oil-pressured
  
• Composit lower arms
  
• C-hub front arms, turnbuckle upper links
  >
  

ENGINE

• Vertex Racing VX18 Nitro engine
  
• Rotary 2-needle caburetor
  
• Pull start
  
• Side exhaust with composite tuned pipe and air filter
  
  
• Heat sink engine mounts
  
• Glow plug supplied
  
  

RADIO

• 2 channel hobby grade digital proportional radio
  
• Electronic steering and speed trimmer
  
• Ch1 and Ch2 individual reverse switch
  
• Frequency crystal interchangeale
  
• Requires 8x AA batteries in TX, 4x AA in RX

HSP Sonic 1:10 Nitro 2-speed Touring Car (RTR)

• 2 speed transmission
  
• Low friction Shaft drive transimmsion system.
  
• Gear Differentials.
  
• Metal Cap Oil damper shock installed.
  
• Multiple shock installig positions for fine tune.
  
• Low Center of Gravity located Steering Servo
  
• Camber, toe angle are fully adjustable
  
• Fuel tank with vast capacity, easily to refuel with super calibre, prevent overflowing and leaking
  
• Front/rear umbrella gear differential and differential box with leak protection
  
• With 13.8g super-light-weight fly wheel, make the engine smaller in load
  
• Differential box fixed with 5pcs of screw only, fixing/disasembling is easy
  
• The all-metal disc type brakes and super thick asbestos brake block
  
• Flexuose 6061 aluminum chassis, thickness:2.5mm
  
• Double sponge filter, dustproof result is better. 7.5mm oversize gas vent

- Length - Width - Height - Track - Wheelbase - Weight - Clearance - Gear ratio - Wheel Size - Engine

380mm 200mm 112mm 195mm 260mm approx. 1800g 4.5mm 5.43 (H), 8.04 (L) 65x26mm .16 SH High Quality Engine

(1) 1 x BRAND NEW ENGINE

(2) 1 x 1:10 SCALE PAINTED LEXAN BODY CHASSIS

(3) QUALITY SANWA OEM "SPEED" SPORT WHEEL RADIO CONTROL SYSTEM
(4) FULL ENGLISH MANUAL &
WARRANTY

HSP SPRINTER 1:6 Nitro 3-Speed Touring Car

• Many parts are blue anodized for impressive
  
• High-tech looks: shocks,
  
• Radio plate, front and rear shock stays, and upper
  plate.
  
• Front and rear brakes have stainless steel
  
• Large diameter rotors with
  
• Heavy-duty pads for smooth stopping power.
  
• The included 21 engine with blue-anodized engine head
  features an efficient, newly designed large diameter carburetor and high
  performance muffler.
  
• 3-speed transmission.

 

Length: 610mm

Width: 330mm

Tyres size (F/R): 100*46mm

Weight: 2740g

Track (F/R): 320mm

Wheelbase: 400mm

Engine: 21/28

Low-speed gear ratio: 6:1

Middle-speed gear ratio:7.7:1

High-speed gear ratio: 10.3:1

(1) 1 x BRAND NEW ENGINE

(2) 1 x 1:6 SCALE PAINTED LEXAN BODY CHASSIS

(3) QUALITY SANWA OEM "SPEED" SPORT WHEEL RADIO CONTROL SYSTEM
(4) FULL ENGLISH MANUAL &
WARRANTY

HSP Tyrannosaurus 1:10 Nitro 4WD Truck (RTR)

This monster truck has been designed for the novice to engine powered models- The truck is built sturdy. The engine is the excellent force .18 this superb powerplant is in my opinion one of the most reliable and trouble free model car engines out there. This isnt the fastest model in its class but its certainly the toughest a thick chassis with thick suspension supported by a pair of shock absobers per axle - We by accident crashed the test model in to a lampost at full speed - it bounche 3 ft in the air rolled allot and landed on its wheels - After a quick check we found a crack in the bodyshell but no other damage

The model has a outstanding feature - The front and rear bumpers are on Sprung shock absorbers - this takes the initial impact of a crash and relly does protect your model

Its easy to start , easy to adjust and easy to mantain its a great Model for a gift ior a first statrer model. This RTR (Ready to Race) Model only needs AA batteries and Nitro fuel and your racing.

• 
  
  

  Low friction Shaft drive transmission system.

  
  
  
• 
  
  

  Over loading slipper gear system minimize the chance
  of damage of main spur gear.

  
  
  
• 
  
  

  Bumper with spring absorber both in front and rear of
  chassis

  
  
  
• 
  
  

  Gear Differentials.

  
  
  
• 
  
  

  8 pcs Metal Cap Oil damper shock installed.

  
  
  
• 
  
  

  Multiple shock installing positions for fine tune.

  
  
  
• 
  
  

  Low Center of Gravity located Steering Servo

  
  
  
• 
  
  

  Camber, toe angle are fully adjustable

  
  
  
• 
  
  

  Fuel tank with vast capacity, easily to refuel with
  super calibre, prevent overflowing and leaking

  
  
  
• 
  
  

  Front/rear umbrella gear differential and differential
  box with leak protection

  
  
  
• 
  
  

  With 13.8g super-light-weight fly wheel, make the
  engine smaller in load

  
  
  
• 
  
  

  Differential box fixed with 5pcs of screw only,
  fixing/disassembling is easy

  
  
  
• 
  
  

  The all-metal disc type brakes and super thick
  asbestos brake block

  
  
  
• 
  
  

  Hi-Grade 6061 aluminum chassis, thickness:2.5mm

  
  
  
• 
  
  

  Double sponge filter, dust proof result is better. 7.5mm oversize gas vent

  
  

Bumper with spring absorber both in front and rear of chassis

Double shock system on each supspensino arm

Length Width Height Track Wheelbase Weight Clearance Gear ratio Wheel Size Engine

400mm 310mm 185mm 195mm 275mm approx. 1900g 30mm 14.3 : 1 120x60m .18 CXP

(1) 1 x BRAND NEW ENGINE

(2) 1 x 1:10 SCALE PAINTED LEXAN BODY CHASSIS

(3) QUALITY SANWA OEM "SPEED" SPORT WHEEL RADIO CONTROL SYSTEM

(4) FULL ENGLISH MANUAL & WARRANTY